To select the right oil seal, match its dimensions, sealing material, construction, and operating conditions to the equipment—not just to the old seal’s appearance. Before ordering a TEBIETE OIL SEAL, record the shaft diameter, housing bore, seal width, fluid type, temperature, shaft speed, and direction of rotation. When replacing a seal, inspect the shaft and housing for wear or damage and install the new part with the correct orientation. We use the guide below to help B2B buyers prepare specifications, compare options, and request a suitable quotation.
For more information, please visit our website.
This guide is for maintenance teams, OEM engineers, distributors, and procurement professionals sourcing oil seals for rotating equipment. It is useful whether you are replacing a known part or specifying a seal for a new assembly. If the original seal has no readable part number, measurements and operating details can help narrow down the required design. Final selection should still be checked against the equipment requirements and the supplier’s product information.
An oil seal is a component fitted around a rotating or moving shaft to help retain lubricant and limit the entry of contaminants. A typical radial shaft seal includes a sealing lip that contacts the shaft and an outer section that fits into the housing. Some designs include a secondary dust lip or a spring to support sealing contact. The appropriate construction depends on the application, and no single design suits every operating environment.
Radial oil seals are commonly specified by three dimensions: shaft diameter, housing bore diameter, and seal width. For example, a seal described as 30 × 52 × 7 mm has a nominal shaft diameter of 30 mm, a housing bore diameter of 52 mm, and a width of 7 mm. This is an illustrative size format, not a recommendation for a particular machine or a statement about TEBIETE stock. Confirm the equipment drawing or measure the relevant parts before placing an order.
Common elastomer options include nitrile rubber (NBR), fluoroelastomer (FKM), and silicone, but availability and suitability depend on the specific product and compound. NBR is often considered for general oil-sealing applications, while FKM may be evaluated where the application requires different fluid or temperature resistance. Silicone can be relevant in applications with particular low-temperature or flexibility requirements, but it is not interchangeable with other compounds by default. Ask the supplier to confirm compatibility with your fluid, temperature range, and duty cycle using product-specific information.
Construction also affects the choice. A single-lip seal may be suitable where lubricant retention is the main need, while a design with an auxiliary dust lip may be considered where external contamination is a concern. A garter spring can help maintain lip contact, but its presence alone does not determine suitability. Check the seal profile, lip direction, spring arrangement, and installation space against the equipment design.
Before choosing a replacement, describe how the equipment operates. Record the lubricant or process fluid, the normal and peak operating temperatures, shaft speed, pressure conditions, and exposure to water, dust, or abrasive particles. Also identify whether the shaft rotates continuously, intermittently, or in both directions. These details help the supplier assess whether a standard design may fit or whether further technical review is needed.
| Selection factor | Information to provide | Why it matters |
|---|---|---|
| Dimensions | Shaft diameter, housing bore, and seal width | Confirms the basic fit between seal, shaft, and housing |
| Operating conditions | Speed, temperature, pressure, and duty cycle | Helps assess design and material suitability |
| Media and environment | Lubricant or fluid, dust, water, and other contaminants | Supports material and auxiliary-lip selection |
| Installation | Shaft condition, housing details, and seal orientation | Reduces the risk of installation-related leakage or damage |
Look for a part number or size marking on the seal, machine documentation, or maintenance records. If the marking is missing, remove the seal carefully and measure its inner diameter, outer diameter, and width where possible. Do not rely on a worn or distorted seal as the only source of dimensions. Compare measurements with the equipment drawing or an undamaged reference part before confirming an order.
TEBIETE Product Page
Inspect the shaft where the lip contacts it and check the housing bore for corrosion, scoring, burrs, or deformation. A new seal may not resolve leakage if the shaft surface or housing fit is damaged. Note any visible wear groove and share this information with your maintenance or engineering team. Where repair or shaft-sleeve options are being considered, confirm the approach against the equipment manufacturer’s guidance.
Provide the supplier with the actual service conditions rather than a general description such as “high temperature” or “fast rotating.” Include the fluid name, temperature range, speed, pressure, and contamination exposure when known. If exact values are unavailable, say so and provide the best documented operating information. We recommend confirming all operating limits against the selected product’s technical data rather than assuming that a material name guarantees compatibility.
Check which side of the seal faces the lubricant and whether the design includes a secondary lip. A primary sealing lip is generally oriented according to the sealing arrangement, so confirm the correct direction from the equipment documentation or a qualified technician before installation. Use suitable installation tools to avoid cutting, twisting, or deforming the lip. Keep the shaft and seal clean, and follow the equipment maker’s instructions for lubrication and fitting.
After installation, verify that the seal sits evenly in the housing and that the shaft turns as intended without abnormal contact. Follow the machine’s commissioning procedure and monitor for leakage or unusual operating conditions. If leakage continues, investigate possible causes such as shaft wear, incorrect dimensions, incompatible material, pressure, or installation damage. Replacing the seal again without checking the underlying cause may not resolve the problem.
For an accurate quotation, send the required dimensions, material preference if known, application details, estimated quantity, and any drawing or sample information you can share. Ask whether the quoted product is a standard item or a custom specification, and request confirmation of the material and construction. Minimum order quantity (MOQ), lead time, packaging, and sample availability can vary by product and order requirements. We advise buyers to confirm these commercial details directly with the supplier before scheduling maintenance or production.
A useful supplier review is based on specification clarity, communication, and the ability to discuss the application—not price alone. Buyers should distinguish between confirmed product details and assumptions, especially when a seal is being sourced as a replacement for a critical machine. Share technical requirements early so that the supplier can identify missing information before the order is finalized.
As a manufacturer, supplier, and exporter of TEBIETE OIL SEAL products, we can review the information you provide to help clarify the required specification and sourcing details. Send us the seal dimensions, application, operating conditions, quantity, and any available drawing or sample reference. We can then discuss suitable product options and confirm applicable MOQ, lead time, and quotation details for your requirement. Where important technical information is missing, we recommend resolving it before approving the order.
The right oil seal is selected by combining accurate dimensions with material, design, and operating-condition requirements. For replacement, inspect the shaft and housing as well as the seal, then confirm orientation and installation instructions before restarting the equipment. Avoid choosing solely by visual match or price, and verify product-specific limits with the supplier. To request a TEBIETE OIL SEAL quotation, prepare your dimensions, application details, required quantity, and any drawing or sample information, then contact our team for a specification and sourcing discussion.
Want more information on TEBIETE OIL SEAL? Feel free to contact us.