At Alabama Wire, Inc., we are the foremost independent provider of straightened and cut wire in the United States. Leveraging over three decades of industry experience and a 50,000 square foot facility equipped with state-of-the-art straightening and cutting machines, our team turns wire coils into straight wire lengths cut to customer specifications.
Jiaohao Wire Mesh supply professional and honest service.
Our wire straightening and cutting facility accommodates a broad range of materials, grades, and sizes to suit varying customer needs. From small to large production runs, our diverse set of modern production equipment and expert team meets virtually any straighten and cut need with high-quality products and quick turnaround.
Straightening and Cutting Equipment
For our wire straightening and cutting operations, we use state-of-the-art equipment that employs:
Our capabilities also include the ability to perform secondary operations on the straightened and cut wire, such as flattening, deburring, swaging, chamfering, and finishing ends to a precise, specified radius.
The above equipment allows us to process a wide range of materials and grades in a variety of wire diameters and lengths, including ones that comply with ASTM standards. Some of the materials we work include:
For these materials, we offer straightening and cutting capabilities for a variety of gauges and lengths. We can handle wire diameters up to 0.630 inches and wire lengths ranging from 1 inch to 24 feet to close tolerances. Custom cutting of shorter (less than 1 inch) and longer (up to 50 feet +/- 6 inches) lengths to accommodate specialized needs is also available.
In addition to straightening and cutting wire to meet the specifications of our customers, we also provide a variety of finishes, including:
Our straightened and cut wire products find use in a broad range of industrial applications, such as in:
For over 30 years, Alabama Wire has served industry by supplying high-quality cold-drawn wire. Using state-of-the-art equipment housed in our 50,000 square foot production facility, we straighten and cut wire, as well as produce coiled and re-coiled wire and custom wireforms and fabricated wire products. By choosing us as wire straightening and cutting service provider, customers can benefit from our:
If you’re looking for a one-stop source to meet all of your wire and wire product needs, choose Alabama Wire, Inc. to learn more about our straightening and wire cutting capabilities or to request a quote from one of our experts.
This guide on cutting wire is part of our series to outline everything that you need to know about our products. We hope that you find it helpful and that it answers any questions that you may have.
Here it goes…
Cutting wire is a type of wire that is specifically designed to be used in cutting machines and tools. It is typically made of high-carbon steel, stainless steel, or other durable materials. The wire is usually thin and flexible, and is used to cut through a variety of materials such as metal, plastic, and rubber. It can be found in different shapes, sizes and forms, such as straight, circular or diamond shape.
There are different types based on the cutting method, for example:
Are you interested in learning more about straight cut wire? Contact us today to secure an expert consultation!
These metals are used in various industries such as aerospace, automotive, construction, and manufacturing.
A cold wire cutter is a cutting tool that uses a wire that is not heated to cut through materials. The wire is usually made of a strong and durable material, such as tungsten or stainless steel. Cold wire cutters can be used to cut a wide range of materials including metals, plastics, ceramics, and composites. They are commonly used in manufacturing, industrial, and repair applications to make precise cuts with minimal heat distortion, burrs or stress on the material.
It depends on the specific application and the material being cut. Generally, thicker wire is better for cutting thicker or harder materials, while thinner wire is better for cutting thinner or softer materials. However, the wire thickness also affects the flexibility and durability of the wire, so it’s important to choose a wire that is appropriate for the intended use. It’s best to consult a professional or consult the manufacturer’s specifications for specific recommendations.
Our wires are stocked from 0.03mm all the way to 1.5mm, so we will surely have you covered.
Nichrome is a type of wire that is made from an alloy of nickel and chromium, known as nichrome. Nichrome is known for its high resistance to corrosion and heat, as well as its ability to maintain a consistent temperature. This makes it ideal for use in cutting machines and tools that require precision and heat resistance.
One of the most common use of nichrome wire is in hot wire cutting method, where the wire is heated to high temperatures using an electrical current. This melts the material as the wire cuts through it, allowing for clean and precise cuts. Nichrome wire is typically used to cut through materials such as foam, plastic, and rubber.
Nichrome wire is also used in some other applications such as heating elements, heating wire, and furnace components due to its good resistance to oxidation and high-temperature stability.
Yes, Ka1 wire can be used as a hot cutting wire in a hot wire cutter. KA1 wire is a type of iron-chromium-aluminium alloy (FeCrAl alloy) that is commonly used for heating elements in various applications, including hot wire cutters. It has a high resistance to oxidation and can withstand high temperatures without breaking down, which makes it well-suited for use as a hot cutting wire. It can be used to cut through a variety of foam materials like Styrofoam, polystyrene, and other thermal plastics.
Stainless steel wire can be used as a hot cutting wire, but it is not the ideal choice. Stainless steel has a high melting point and is difficult to heat up to the required temperature. Also, stainless steel wire generates a lot of sparks during the cutting process, which can be dangerous.
A better choice is a material like tungsten, which has a lower melting point and is easier to heat up. Tungsten also generates less sparks than stainless steel and is considered to be more safe.
When cutting metal with a hot cutting wire, it’s very important to use the appropriate safety equipment and take the necessary precautions.
Therefore, it is recommended to use a specialised wire or material for hot cutting, that has been designed and tested for this specific application, rather than using stainless steel wire.
A wire cutter is the best tool for the task. It typically has two jaws, one of which is a cutting edge and the other is used to hold the wire in place while it is being cut. Wire cutters are commonly used in electrical work, jewellery making, and other crafts that involve cutting wire. Thinner wires can be cut with standard scissors.
We have a huge range of stainless steel, nichrome, KA1 and other metals available in many thicknesses and spool lengths. Our products are produced in house and are available at brilliant prices with rapid production speeds.
We hope that this answers all questions that you may have for us about this product. Please feel free to contact us if you need any more information about anything wire related.
For more information, please visit window screen roll.