Rust proof plastic vent covers are the way to go for homes which experience high levels of moisture. Our cold air return can be used on your ceiling or wall to cover up any open ductwork to help direct the airflow. These plastic vent covers are made out of a high density polystyrene construction, making them scratch proof. For a classic cold air return look but at a way more affordable price, check out these contemporary grilles.
The cold air return comes with screws that allow you to mount this unit over any open ductwork. No professional help needed! Virtually flat plastic vent covers do not have any dampers to close off airflow. For cold air returns which are not flat, check out this plastic baseboard grille.
If you want to learn more, please visit our website Shuangcheng New Material.
For metal or wood cold air returns, check out the return air grilles section of our website.
Buy these plastic vent covers to immediately replace rusted grilles from your home. Click or call today.
Shipping Policy:
Available shipping options are shown in the table below. The Warehouse Rush option has been added due to customer demand.
Warehouse Rush means your order will take priority in the warehouse to ship out as soon as possible. Warehouse Rush fee varies according to product(s) ordered. Shipping fees will be calculated and shown once all items have been added to the cart and your shipping method has been selected.
Standard Shipping and Warehouse Rush options will ship out ground USPS, FedEx, UPS, or Spee-Dee Delivery.
Orders with products that ship directly from the manufacturer or have longer lead times are not eligible for Warehouse Rush. Exceptions will only have the Standard Shipping option available.
Should any unexpected shipping delays arise and the order cannot be shipped via Warehouse Rush, you will be contacted and refunded the difference between Standard Shipping and Warehouse Rush fees.
Please call, toll free at (866) 258- or our local number at (608)-244-, Monday through Friday, 8am-5pm CST or for expedited, APO/FPO, or shipments outside Continental US. Please note customers are wholly responsible for these shipping fees.
Transit times can vary depending on destination. Orders are shipped Monday through Friday, with the exception of national holidays.
Please contact us immediately in the event an incorrect product has been sent or an order has been damaged in shipping. We will gladly remedy the situation at no extra cost to you.
Acquiring a Return Merchandise Authorization (RMA) Number:
Please call 866-258- or to receive a Return Merchandise Authorization number if there is any reason you would like to return your order. All charges to ship merchandise back are the responsibility of the customer. There will be a 10% re-stock fee on all returned orders, unless a replacement order has been made. Customers are given 7 days from the delivery date to contact us for a RMA number. Returns must be received back to our warehouse within 90 days. Fees may change based on extended time passing.
Returns of open/used products are not accepted.
Special order items are not returnable and are designated on the specific product pages.
Shipping charges are not refundable.
FloorRegisters-N-Vents/InstallerStore strongly encourages choosing a shipping method for your return where a tracking number and insurance can be obtained. Accounts will be credited back after inspection has been made to the product to ensure product has not been damaged in any way and can be resold. Packages damaged while being shipped back to us will not be accepted as a return and customer will be contacted. FloorRegisters-N-Vents/InstallerStore is not responsible for lost or damaged returns. It is the customer's responsibility to file a claim with the shipping company.
Any merchandise that is shipped back without a RMA number will have a minimum re-stocking fee of 25% of the product cost and shipping charges will not be refunded.
All returned products must be shipped directly to FloorRegisters-N-Vents/InstallerStore even if they were originally shipped from the manufacturer, unless otherwise told by FloorRegisters-N-Vents/InstallerStore. Shipping back to manufacturer may cause re-stocking fee to increase.
Registers are slatted vents that can help regulate the flow of both warm and cold air into your living space. Registers differ from grilles in that they have an adjustable louvered damper that can aim the air flow in a certain direction or shut it off completely. These registers are commonly placed in floors and in room ceilings so that the air flow will be distributed evenly around the space. It is important to not block floor registers with furniture so that they can properly do their job. Unnecessary vents and registers, such as those that may be in a closet or unused room, can be closed and covered with a floor vent cover.
When replacing an existing floor register, be sure to choose a new one that will fit your duct opening. Remove the old floorboard vent register and measure the height and width of the duct opening (not the old register itself) to determine the correct register size. Measure and record the height first. Manufacturers typically indicate the height of a register followed by its width. If the opening is larger than a normal register size, make sure that the register has wider edges to accommodate for the necessary extra coverage.
If your duct measurements don’t match a register size exactly, you can often round the duct measurements to the nearest half inch. We’ve got some common duct and register sizes below, but they’re general measurements. Always check your duct size against the specifications for the register you’re considering.
3-in x 10-in Floor Register
4-in x 8-in Floor Register
4-in x 10-in Floor Register
4-in x 12-in Floor Register
4-in x 14-in Floor Register
6-in x 10-in Floor Register
6-in x 12-in Floor Register
6-in x 14-in Floor Register
Are you interested in learning more about Plastic Grille Supplier? Contact us today to secure an expert consultation!
Similar to floor registers, sidewall registers and ceiling registers should match the duct size, but if your ducts don’t match the exact register measurements, you can typically round fractions to the nearest half inch. Check the register specifications, but here are some common register sizes and general size ranges for compatible ducts.
4-in x 10-in Sidewall or Ceiling Register
8-in x 4-in Sidewall or Ceiling Register
10-in x 6-in Sidewall or Ceiling Register
12-in x 4-in Sidewall or Ceiling Register
12-in x 6-in Sidewall or Ceiling Register
14-in x 8-in Sidewall or Ceiling Register
Grilles cover the return air ducts in a climate system. They do not have adjustable air flow or shut-off like a register does because the flow of air is necessary to the system operation. You may find them in walls or ceilings so as to be unobstructed in drawing air out of the room.
The correct size for a return grille will depend on the size of the rough opening for the return duct. If your rough opening sizes don’t match available grille sizes, again, you can often round to the nearest half inch, but check the grille documentation for specifics. Common grille and rough opening sizes include:
12-in x 6-in Grille
14-in x 14-in Grille
16-in x 20-in Grille
20-in x 20-in Grille
20-in x 25-in Grille
When choosing a finish for your register, think about what finish would look best in your home. Floor register finishes can easily complement your current décor items, such as door hardware, cabinet hardware, ceiling fans or light fixtures.
Decorative floor registers are available in a variety of metal, plastics, woods and finishes:
When replacing a floor register in a high-humidity area, such as a bathroom, consider using a decorative, high-impact plastic register. These are available with high-quality finishes, and they're completely rust-proof.
Floor Buying Guide
10 Questions to Ask Before Buying A New Floor
For more information, please visit Plastic Geogrid.