214 Beer Can Bottom Ends: Specifications and Compatibility Guide

10, Nov. 2026

 

214 Beer Can Bottom Ends: Specifications and Compatibility Guide

A 214 beer can bottom end is identified by a nominal end-size designation that is commonly interpreted as 2 + 14/16 inches, or 2.875 inches (about 73.03 mm). That designation alone does not confirm that an end will fit a particular can body or seaming setup. Buyers should match the end to the can maker’s specifications, the seamer setup, and the exact end profile, then confirm compatibility with a drawing and production trial before placing a full order.

Read more

This guide is for breweries, can manufacturers, packaging buyers, and importers evaluating 214 ends for a specific beer can project. It explains what to verify, how to compare specifications, and what information to request from a supplier such as Wanhua. Because commercial naming conventions and designs can vary, use the nominal size as a starting point rather than a complete technical specification.

Key Takeaways

  • The “214” designation is a nominal size reference; it does not by itself establish full dimensional or seaming compatibility.
  • Confirm the end diameter, profile, material and coating, tab configuration, and seaming requirements against the intended can body.
  • Request a current technical drawing and written specification, and validate the selected end on the actual production line.
  • When requesting a quotation, share the can and seamer details alongside the target quantity, delivery location, and required timing.

What Is a 214 Beer Can Bottom End?

A beer can bottom end is the formed metal component attached to the lower opening of a can body. It closes the package and forms part of the can’s structural enclosure. In a finished two-piece beverage can, the bottom end is joined to the body by a double seam, so its dimensions and profile must work with the body flange and the seaming equipment.

In a commonly used fractional interpretation of end-size codes, “214” represents 2 + 14/16 inches. This calculation gives a nominal diameter of 2.875 inches, equivalent to approximately 73.03 mm. Treat this as a designation-level reference only: the actual end dimensions, tolerances, curl, countersink, and other profile details must come from the supplier’s approved drawing.

Specifications and Options to Review

Dimensions and End Profile

Ask for a dimensioned drawing that identifies the measurements relevant to your can and seamer. Depending on the design, the drawing may specify the end’s overall diameter, countersink depth, curl, and other profile features. Compare the supplier’s drawing with the can-body and seamer documentation rather than relying on a size code or a visual comparison.

Also confirm how the specification defines each dimension, including the measurement method and any stated tolerances. A buyer should not assume that two ends carrying the same nominal designation have interchangeable profiles. If your current supplier’s end is being replaced, provide its drawing or an approved physical sample for comparison, while still requiring technical approval of the proposed replacement.

Material, Coating, and Opening Features

Request the material specification, nominal stock thickness, and coating or lacquer details for the proposed end. The selected material and protective coating should be appropriate for the product, packaging process, and applicable market requirements. Do not infer food-contact suitability or regulatory compliance from the product name; ask the supplier for the relevant documentation for the exact item and destination market.

Clarify the end style and opening features required for the can, including the tab and score configuration where applicable. Confirm whether the end is intended for your filling and consumer-use requirements, and whether the tab design matches the can and package presentation. Custom colors, printing, or other finishes should be reviewed as separate specification items rather than assumed to be included in a standard offer.

How to Assess Compatibility

1. Identify the Can Body and Seamer

Start with the can-body manufacturer, body dimensions, flange details, and the seamer model or setup used on the line. Share the can-body drawing and the relevant seaming specifications with the end supplier. If the can body or seamer setup is changing, reassess compatibility instead of carrying over approval from a different configuration.

2. Compare the Technical Documents

Review the end drawing against the can-body and seamer requirements. Pay particular attention to the interface dimensions and profile features that affect feeding, positioning, and seam formation. Ask the supplier to identify the revision date and drawing number, and ensure that the quotation, samples, and production order all refer to the same approved specification.

3. Validate with Samples and a Production Trial

Before approving a large order, agree on a sample review and trial plan with the end supplier and your can-making or filling team. Check that the ends feed correctly and that the resulting seams meet your established inspection criteria. The supplier can provide product documentation and discuss process controls, but final line approval should be based on your equipment, operating conditions, and quality requirements.

Wanhua Product Page

Record the approved sample identification, drawing revision, material details, and trial outcome. This creates a clear reference for repeat orders and helps prevent accidental specification changes. If the line, can body, or end design changes later, review whether the previous approval still applies.

Buyer Selection Framework

Review Area Questions to Ask Why It Matters
Size and profile Does the drawing match the can-body and seamer requirements? The nominal 214 designation does not define every interface dimension.
Material and coating What material, thickness, and coating are specified for this end? These details need to suit the product and packaging process.
Opening design Does the tab and score configuration match the intended package? Opening features are part of the approved product specification.
Quality documentation Which inspection records and compliance documents are available? Documentation should relate to the exact item and target market.
Supply terms What are the MOQ, lead time, packing method, and order-change terms? These affect project planning and replenishment.

Pricing, MOQ, and Lead Time

The price of a 214 beer can bottom end depends on the confirmed specification and commercial terms. Relevant factors may include material and coating, printing or finish requirements, order volume, packaging, and delivery location. Since prices and minimum order quantities vary by project, request a quotation against a defined drawing and quantity rather than relying on a generic per-piece estimate.

Ask the supplier to state the MOQ, sample availability, production lead time, shipment terms, and quotation validity in writing. Lead time may depend on specification approval, production scheduling, and shipping arrangements, so confirm whether the quoted schedule begins after drawing approval or another agreed milestone. For repeat orders, clarify how the supplier will handle forecast changes and replenishment planning.

Supplier Evaluation Checklist

A dependable supplier discussion should make technical and commercial responsibilities clear. Ask whether the supplier can provide a current drawing, specification sheet, and sample for the exact end proposed. Confirm how revisions are controlled and what documentation can accompany the order.

  • Can the supplier review your can-body and seamer information before quoting?
  • Will the quotation identify the approved end specification and drawing revision?
  • Can the supplier explain available material, coating, tab, and finish options?
  • What sample, inspection, and documentation support is available for evaluation?
  • Are MOQ, lead time, packaging, shipment terms, and change-control expectations stated clearly?

Common Compatibility Mistakes

A frequent mistake is treating “214” as a complete fit guarantee. The designation is useful for initial identification, but it does not replace a dimensional drawing or approval against the intended body and seamer. Another risk is comparing only overall diameter while overlooking profile details and the specified tolerances.

Buyers should also avoid approving a sample that does not match the quoted production specification. Verify that sample identification, drawing revision, coating, and opening design correspond to the order documents. Finally, do not assume that a supplier’s general compliance statement covers every market or every product; request documentation for the precise item and application.

How Wanhua Can Support Your Sourcing Review

Wanhua can discuss 214 beer can bottom end requirements with B2B buyers and help organize the information needed for a project review. Share your current end drawing or sample details, can-body specifications, seamer information, annual or order quantity, destination market, and preferred delivery schedule. With these details, Wanhua can assess the requested specification, clarify available options, and prepare a project-specific quotation for review.

For an efficient inquiry, identify whether you need a standard specification or are evaluating a replacement for an existing end. Include the required coating, opening features, packaging preferences, and any documentation expectations. Compatibility should be confirmed by technical review and production validation before commercial approval.

Conclusion: Confirm the Specification Before Ordering

A 214 beer can bottom end is commonly associated with a nominal 2.875-inch (73.03 mm) size, but the code alone cannot establish compatibility with your can or seaming line. The practical next step is to compare the supplier’s current drawing with your can-body and seamer requirements, confirm material and coating details, and validate samples under your agreed inspection process.

To begin a sourcing discussion with Wanhua, send the end drawing or sample reference, can-body and seamer information, required quantity, destination, and target delivery timing. This gives both teams a clearer basis for confirming the specification, discussing supply terms, and moving toward an informed order decision.

For more 214 Beer Can Bottom Endsinformation, please contact us. We will provide professional answers.