Bushfire mesh is not different from any woven wire mesh. Any stainless steel woven wire mesh with an aperture of 2mm or less automatically complies with Australian standard for bushfire protection code.
The bushfire protection stainless steel woven wire mesh can be used for protection against ember attacks and radiant heat. It can be used to protect windows, doors, skylights, decking and patios, heating unit, roof vents and gutters, evaporative cooling units, and eaves and downpipes.
Bushfire protection under AS3959-2009 is required on sites where the Bushfire Attack Level (BAL) has been determined as one of the six levels of risk; construction of a building in bushfire-prone areas’ specifies screening of openings to be made with corrosion- resistant steel mesh, with a maximum aperture of 2mm.
All the mesh below has an aperture of less than 2mm and bigger open area to let a breeze in the home.
Approx aperture
Mesh Per inch
Wire Dia
Approx open Area %
Approx Wire Gauze
mm
inch
mm
micron
1.82 1820 10 0.71 0.028 52% 22 1.74 1740 10 0.8 0.032 46% 21 1.6 1600 10 0.91 0.035 41% 20 1.6 1600 12 0.5 0.02 58% 25 1.4 1400 12 0.71 0.028 44% 22 1.3 1300 14 0.5 0.02 52% 25 1.25 1250 14 0.56 0.022 48% 24
Reference websites to get more information about bushfire protection and their requirement.
http://www.vba.vic.gov.au
http://www.cfa.vic.gov.au
Also, a customer must check with their local authority to find out the right specification and right product material for bushfire mesh.
Want more information on stainless steel mesh tubes? Click the link below to contact us.